Investigation of lifelines analysis methods used in working at heights

Basit Öğe Kaydı
dc.authorscopusid58684816400
dc.authorscopusid58684502700
dc.contributor.authorKizilgöz, Hatice Rumeysa
dc.contributor.authorYapan, Türker
dc.date.accessioned2024-09-11T19:59:20Z
dc.date.available2024-09-11T19:59:20Z
dc.date.issued2023
dc.departmentİstanbul Gelişim Üniversitesien_US
dc.description.abstractWorking at height is one of the most dangerous activities in terms of occupational health and safety. In particular, most of the fatal occupational accidents occur in the form of falling from a height. Therefore, fall arrest systems or fall arrest systems are very important when working at height. In working at heights, fall prevention systems, that is, collective protection measures, are preferred. Guardrails, space restriction systems and some types of safety nets are among the methods used to prevent falling from height. However, these collective protection measures, which are mentioned in working at heights, are often insufficient. Lifelines, which are used in working at height and which have an important place in ensuring safety, appear as an important protective system both in areas where work is constantly at height and when it is necessary to go to height in cases such as maintenance breakdowns. The standards of lifelines are defined in the literature, although the minimum requirements to be met are mentioned, it is seen that the purposes of the test methods are not fully explained in the literature. It is considered that knowing how the equipment to be used in working at height is tested, what the test stages are and carrying out enlightening studies on this subject will both contribute to the knowledge in terms of Occupational Health and Safety and prevent occupational accidents that may arise from the wrong equipment selection. In this part of the book, the minimum limitations of lifelines in terms of occupational health and safety test methods will be explained and supported with visuals. © 2023 Nova Science Publishers, Inc. All rights reserved.en_US
dc.identifier.endpage154en_US
dc.identifier.isbn979-889113120-0en_US
dc.identifier.isbn979-889113085-2en_US
dc.identifier.scopus2-s2.0-85176015308en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage133en_US
dc.identifier.urihttps://hdl.handle.net/11363/8673
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherNova Science Publishers, Inc.en_US
dc.relation.ispartofInterdisciplinary Perspectives on Occupational Safety and Healthen_US
dc.relation.publicationcategoryKitap Bölümü - Uluslararasıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.snmz20240903_Gen_US
dc.subjectLifelines; Occupational safety and health; OSH; Safe working at heightsen_US
dc.titleInvestigation of lifelines analysis methods used in working at heightsen_US
dc.typeBook Chapteren_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu