Experimental investigation of the effect of fabric wrapping method and autoclave curing on the mechanical and thermal degradation of carbon nanotube doped and undoped carbon composite pipes

Basit Öğe Kaydı
dc.contributor.authorKayrici, Mehmet
dc.contributor.authorTaser, Hasan Huseyin
dc.date.accessioned2024-09-11T19:50:07Z
dc.date.available2024-09-11T19:50:07Z
dc.date.issued2024
dc.departmentİstanbul Gelişim Üniversitesien_US
dc.description.abstractAlthough it is seen in the literature that composite pipes are produced by filament winding, there are limited number of studies on the use of fabric wrapping and autoclave. In this study, in order to fill this gap and contribute to the literature and industry, composite pipes were produced using fabric wrapping and autoclave methods together and their mechanical and thermal properties were investigated. The effect of carbon nanotube (CNT) reinforcement on these properties was also investigated. According to low velocity impact (LVI) test, 10%-25% impact strength increase was observed with CNT reinforcement. Thermogravimetric analysis (TGA) shows that mass loss decreased by similar to 10% and the degree of thermal degradation increased by similar to 10%. In dynamic mechanical analysis (DMA), it is observed that epoxy glass transition temperature (Tg) increased by 11% with CNT reinforcement. At the end of the study, the mechanical and thermal properties of the pipes produced by autoclave and fabric wrapping methods were improved compared to the literature and contributed to science and therefore to the increased use of prepreg carbon pipes in the industry.en_US
dc.identifier.doi10.1002/pc.28675
dc.identifier.issn0272-8397
dc.identifier.issn1548-0569
dc.identifier.scopus2-s2.0-85195964668en_US
dc.identifier.urihttps://doi.org/10.1002/pc.28675
dc.identifier.urihttps://hdl.handle.net/11363/7563
dc.identifier.wosWOS:001244134500001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherWileyen_US
dc.relation.ispartofPolymer Compositesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmz20240903_Gen_US
dc.subjectautoclave curingen_US
dc.subjectfiber wrapen_US
dc.subjectprepreg carbon fiber reinforced plastic (CFRP)en_US
dc.subjectthermal degradationen_US
dc.titleExperimental investigation of the effect of fabric wrapping method and autoclave curing on the mechanical and thermal degradation of carbon nanotube doped and undoped carbon composite pipesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Makale / Article
Boyut:
4.6 MB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu