Arşiv logosu
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • Sistem İçeriği
  • Analiz
  • Talep/Soru
  • Türkçe
  • English
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "Kalyoncu, Enes" seçeneğine göre listele

Listeleniyor 1 - 3 / 3
Sayfa Başına Sonuç
Sıralama seçenekleri
  • Yükleniyor...
    Küçük Resim
    Öğe
    A Sampling About For Economic Pipe Diameter Calculation
    (İstanbul Gelişim Üniversitesi Yayınları / Istanbul Gelisim University Press, 2019-03-29) Kalyoncu, Enes
    Abstract- Pumps are widely used in our homes, in buildings, in industrial applications, in agriculture, in water supply and many other applications, even though we are not aware of them. When designing a pump system, it is necessary to compare different solutions to choose the most efficient and efficient system. To find the most intelligent solution, some basic facts must be revealed. As a result of the experimental work done, the loss coefficients are calculated with the aid of the determined pressure deductions taking into consideration the flow direction for the flat pipes, valves and fittings (elbows, nipples, cuffs, record, curve, reduction and TE (transitional elements) It was calculated and presented in tables. In this study, a program was developed to determine the optimum diameters of the pipes that allow the water from the plant to be transported at a certain distance. Galvanized pipes were used in the study. The least-lost diameters and the lowest economic costs were calculated for these pipes. Keywords : Centrifugal pump, diameter calculation, pipe losts, economic pipe diameter.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Selective Separation of Coloring Impurities from Feldspar Ore by Innovative Single-stage Flotation
    (TAYLOR & FRANCIS INC, 530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106, 2022) Kalyoncu, Enes; Burat, Fırat
    The classical use of an anionic collector does not lead to a satisfactory flotation response for feldspars with high content of mica, iron, and titanium oxides. Therefore, amine-type cationic reagents are preferred together with an anionic reagent to remove especially problematic mica minerals. In this study, main colored impurities in the albite ore were efficiently removed by single-stage flotation using newly developed anionic-cationic mixed reagents. 2408 collector alone achieved much greater results at 1000 g/t dosage and a salable feldspar concentrate assaying 0.03% Fe2O3 and 0.07% TiO2 was successfully produced with 93% Na2O recovery at natural pH. The synergistic effects of 2404 and 2408 collectors, which were successful in removing iron and titanium oxides, were investigated and a feldspar concentrate with 0.04% Fe2O3 and 0.03% TiO2 was obtained at a slightly basic pH medium. With this novel and innovative approach, the increased capacity, easier control, less unit cost, and low collector dosage can be easily achieved using a single collector without the need for any frother or pH adjusting agents.
  • Yükleniyor...
    Küçük Resim
    Öğe
    Sürdürülebilirlik, Yalın Üretim, Verimlilik ve Yalınlık Kavramlarının Uygulamaları
    (Uluslararası Hakemli Ekonomi Yönetimi Araştırmaları Dergisi, 2017) Süzen, Ekrem; İsmailoğlu, Ahmet; Kalyoncu, Enes
    Yaşadığımız dönemde, gezegenimizdeki kaynaklar giderek azalmakta ve bir çok hayati öneme sahip ihtiyaçlar da insanoğlunun eliyle tahribata uğramaktadır. İsraf önemlidir. Amaç: Bu makalede, yapılan bu tahribatın en aza indirilmesini sağlayacak çok daha “sürdürülebilir” stratejilerin inşaat sektörü ve endüstriyel verimlilik açısından nasıl olabileceği konusu araştırılmıştır. Kapsam: Bu açıdan, inşaat sektöründeki atıklar ve israfla birlikte kurumsal sürdürülebilirlik ve sürdürülebilirliğin doğal çevre ile olan etkileşimi, temiz teknolojinin kullanımı, kaynak verimliliği, temiz teknoloji kullanımı, kirliliğin önlenmesi, yeşil binaların inşası, sürdürülebilirlik ve sosyal çevre ilişkileri araştırılmıştır. Yöntem: Bu çalışma tarama modeli kapsamında betimsel analiz tekniği ile gerçekleştirilmiştir.Yalın üretim ve yalın inşaat kavramı ise endüstriyel verimlilik noktasında değerlendirilirken değişik örnekler sunulmuştur.

| İstanbul Gelişim Üniversitesi | Kütüphane | Açık Erişim Politikası | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Cihangir Mahallesi, Şehit Jandarma Komando Er Hakan Öner Sokak, No:1, Avcılar, İstanbul, TÜRKİYE
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

DSpace 7.6.1, Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2025 LYRASIS

  • Çerez Ayarları
  • Gizlilik Politikası
  • Son Kullanıcı Sözleşmesi
  • Geri Bildirim